GB 869 Countersunk Rivet M2x12 T2 Copper

GB 869 Countersunk Rivet M2x12 T2 Copper — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Specifications

Manufactured to GB 869. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Ordering & shipping

Need a specific size, grade or standard? Send us a quote request — we quote to drawing and to DIN / ANSI / GB / JIS standards.

About this GB 869 rivet

This is a rivet made to GB 869, in T2 Copper, supplied copper plated, with an M2 thread and a 12 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A rivet is a permanent fastener: it is set once and removed only by drilling it out, which makes it cheap and tamper-resistant but not serviceable. Used on sheet metal, ducting, panels, luggage hardware and light structures where the joint is never meant to be opened.

M2 is a metric thread with an 2 mm nominal diameter and a coarse pitch of 0.4 mm (ISO 261). A standard hex head takes a 4 mm spanner across the flats.

Copper plating gives a warm conductive surface, used for appearance and for electrical contact. It tarnishes, so it is normally lacquered.

Is this not quite the size or grade you need? Ask us — we produce small batches to drawing and to DIN, ISO, GB and JIS standards, and we consolidate pallet and container loads for trade orders.