GB 827 Nameplate Rivet M2x4 T2 Copper

GB 827 Nameplate Rivet M2x4 T2 Copper — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Specifications

Manufactured to GB 827. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Ordering & shipping

Need a specific size, grade or standard? Send us a quote request — we quote to drawing and to DIN / ANSI / GB / JIS standards.

About this GB 827 rivet

This is a rivet made to GB 827, in T2 Copper, supplied copper plated, with an M2 thread and a 4 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A rivet is a permanent fastener: it is set once and removed only by drilling it out, which makes it cheap and tamper-resistant but not serviceable. Used on sheet metal, ducting, panels, luggage hardware and light structures where the joint is never meant to be opened.

Copper plating gives a warm conductive surface, used for appearance and for electrical contact. It tarnishes, so it is normally lacquered.

T2 copper (99.9% pure) is used where electrical conductivity and corrosion resistance matter more than strength — earthing and electrical contacts.

Sold by the piece, so one is a valid order. Stock lines leave our warehouse within 24–48 hours of cleared payment, and freight is calculated at checkout from the packed weight and the destination.