DIN 934 Hex Nut Type 1 M1.6 Copper

DIN 934 Hex Nut Type 1 M1.6 Copper — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Specifications

Manufactured to DIN 934. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Ordering & shipping

Need a specific size, grade or standard? Send us a quote request — we quote to drawing and to DIN / ANSI / GB / JIS standards.

About this DIN 934 nut

This is a nut made to DIN 934, in Copper, supplied self colour, with an M1.6 thread. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A nut is the closing half of a bolted joint. Its property class is chosen to match the bolt it is paired with — a class 8 nut for a grade 8.8 bolt, so the thread strips before the bolt breaks. Used wherever a bolt or stud has to be tightened from the far side, and for locking and positioning duties on machinery and steelwork.

DIN 934 is the same part as ISO ISO 4032, GB/T GB/T 6170, GOST GOST 5915-70 / 5927-70. Check the head geometry, the key size and the tolerances before substituting one for another — those do differ between systems.

A coloured finish, in most cases a dyed passivate over a zinc layer or a dyed organic film. Appearance plus light corrosion protection.

Sold by the piece, so one is a valid order. Stock lines leave our warehouse within 24–48 hours of cleared payment, and freight is calculated at checkout from the packed weight and the destination.