DIN 912 Socket Head Cap Screw M2x8 H65 Brass

DIN 912 Socket Head Cap Screw M2x8 H65 Brass — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Specifications

Manufactured to DIN 912. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Ordering & shipping

Need a specific size, grade or standard? Send us a quote request — we quote to drawing and to DIN / ANSI / GB / JIS standards.

About this DIN 912 screw

This is a screw made to DIN 912, in H65 Brass, supplied self colour, with an M2 thread and a 8 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A screw threads directly into the parent material or into a nut, so the thread form, the point and the drive decide what it can be used for. Commonly used on machinery, tooling, appliances, electrical enclosures, furniture and automotive assemblies where the head has to sit low or be driven from one side only.

A copper alloy: non-magnetic, electrically conductive and corrosion resistant in fresh water. Common in electrical, furniture and decorative hardware.

DIN 912 is the same part as ISO ISO 4762, GB/T GB/T 70.1, GOST GOST R ISO 4762. Check the head geometry, the key size and the tolerances before substituting one for another — those do differ between systems.

Is this not quite the size or grade you need? Ask us — we produce small batches to drawing and to DIN, ISO, GB and JIS standards, and we consolidate pallet and container loads for trade orders.