GB 882 Clevis Pin with Hole M3x14 304 Stainless Steel

GB 882 Clevis Pin with Hole M3x14 304 Stainless Steel — stocked and shipped worldwide by SFX Fasteners. Available for single-piece retail orders — no minimum order — dispatched from our own warehouse within 24–48 hours.

Specifications

Manufactured to GB 882. Dimensions meet the published standard; tolerances per the standard’s normal grade unless stated otherwise. Full dimension table available on request.

Ordering & shipping

Need a specific size, grade or standard? Send us a quote request — we quote to drawing and to DIN / ANSI / GB / JIS standards.

About this GB 882 pin

This is a pin made to GB 882, in 304 Stainless Steel, at strength class A2-70, supplied plain, with an M3 thread and a 14 mm length. Every dimension is stated against the standard named above; where a tolerance class matters to your design, ask us and we will confirm it in writing before you order.

A pin is a positive locator: it carries shear rather than clamp load, so it holds two parts in exact alignment instead of pressing them together. Used to locate and hinge components on machinery, linkages, hinges and tooling where a bolt would be the wrong kind of load path.

304 (EN 1.4301, A2) is the general-purpose austenitic stainless grade: good resistance to fresh water, food acids and atmospheric corrosion, non-magnetic in the annealed state. It is the default for indoor and general outdoor fastening where chlorides are low.

Plain (self-colour) means no coating. On 304 and 316 stainless that is fine — the alloy passivates on its own. On carbon steel it will rust, so choose a coated option instead.

Is this not quite the size or grade you need? Ask us — we produce small batches to drawing and to DIN, ISO, GB and JIS standards, and we consolidate pallet and container loads for trade orders.